Z950M

ZTrak™ Zero-Turn Mower

  • 7-Iron PRO Mowing Deck
  • Mulch On Demand Available
  • Petrol Engine

Features

Powerful 27-hp (20.1-kW) commercial-grade engine delivers class-leading performance and efficiency

Z950M and Z950R engineZ950M and Z950R engine

The Z950M and Z950Rare powered by an air-cooled, vertical shaft engine:

  • 27-hp (20.1-kW) gas engine

Engine features include:

  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Oil filter helps keep oil clean for increased engine life
    • V-twin big block design
  • Vertical shaft
  • Easy-access, dual-element air filter with quick-release latch
  • 15-amp alternator
  • Fuel pump
  • Complies with strict Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque
  • Aluminum block engines
    • Effectively dissipate heat
    • Lightweight and strong construction
    • Extend engine life due to elimination of debilitating engine temperatures
    • Air-cooled engine design
Air cleaner filters out dust that can damage an engine
Engine air cleanerEngine air cleaner
Air cleaner cover removedAir cleaner cover removed

ZTrak™ Z900 Mowers are equipped with a dual-element, canister-style air filter, easily accessible from the rear of the machine without tools.

  • The filtration system pulls clean air from above the engine, in turn filtering out the dust that can damage an engine over time.
  • Filters are extremely easy to change when required.
  • Pre-cleaner provides more protection against contamination in dusty and dirty applications.
Mow all day on a single tank of fuel with efficient and easy-to-fill fuel tank
Fuel tank and filler neckFuel tank and filler neck
Fuel filler neckFuel filler neck

The ZTrak™ Z900 Mowers are equipped with one single-fill, top-draw fuel tank:

  • 11.5-U.S. gal. (43.5-L) capacity enables operators to mow all day without refueling.
  • The fuel gauge makes it quick and easy to see how much fuel is in the tank.
  • Top draw provides added safety.
  • A large fuel-filler neck is angled to make it easy for an operator to complete the fueling process.

Under normal conditions, load, and operation, fuel consumption for the Z900 ZTrak Mowers is 1.5 U.S. gph (5.7 L/hr) to 2.2 U.S. gph (8.3 L/hr), depending on the horsepower and conditions.

Z950M and Z950R engineZ950M and Z950R engine

The Z950M and Z950Rare powered by an air-cooled, vertical shaft engine:

  • 27-hp (20.1-kW) gas engine

Engine features include:

  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Oil filter helps keep oil clean for increased engine life
    • V-twin big block design
  • Vertical shaft
  • Easy-access, dual-element air filter with quick-release latch
  • 15-amp alternator
  • Fuel pump
  • Complies with strict Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque
  • Aluminum block engines
    • Effectively dissipate heat
    • Lightweight and strong construction
    • Extend engine life due to elimination of debilitating engine temperatures
    • Air-cooled engine design
Air cleaner filters out dust that can damage an engine
Engine air cleanerEngine air cleaner
Air cleaner cover removedAir cleaner cover removed

ZTrak™ Z900 Mowers are equipped with a dual-element, canister-style air filter, easily accessible from the rear of the machine without tools.

  • The filtration system pulls clean air from above the engine, in turn filtering out the dust that can damage an engine over time.
  • Filters are extremely easy to change when required.
  • Pre-cleaner provides more protection against contamination in dusty and dirty applications.
Mow all day on a single tank of fuel with efficient and easy-to-fill fuel tank
Fuel tank and filler neckFuel tank and filler neck
Fuel filler neckFuel filler neck

The ZTrak™ Z900 Mowers are equipped with one single-fill, top-draw fuel tank:

  • 11.5-U.S. gal. (43.5-L) capacity enables operators to mow all day without refueling.
  • The fuel gauge makes it quick and easy to see how much fuel is in the tank.
  • Top draw provides added safety.
  • A large fuel-filler neck is angled to make it easy for an operator to complete the fueling process.

Under normal conditions, load, and operation, fuel consumption for the Z900 ZTrak Mowers is 1.5 U.S. gph (5.7 L/hr) to 2.2 U.S. gph (8.3 L/hr), depending on the horsepower and conditions.

Durable 7-Iron™ PRO decks pressed from a single piece of steel

72-in. (183-cm) 7-Iron PRO deck shown72-in. (183-cm) 7-Iron PRO deck shown

The ZTrak™ M and R Series Mowers are equipped with either a side-discharge or Mulch On Demand™7-Iron PRO deck.

7-Iron PRO mower decks have demonstrated quality, performance, and durability. They deliver a high quality cut in diverse conditions.

Key features of the 7-Iron PRO mower deck:

  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
  • The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Mower rectangular leading-edge reinforcementMower rectangular leading-edge reinforcement
Dual-captured anti-scalp wheelDual-captured anti-scalp wheel

Key features of the 7-Iron PRO mower deck:

  • Deck has rectangular leading deck edge reinforcement and the rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Dual-captured front and rear anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three 1-in. (2.5-cm), cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and is reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Three spindle grease fittings are accessible from the top.
  • Blade overlap is 1.6 in. (40.6 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO mower deck
M SeriesR Series
Z920M - 48 in. (122 cm), 54 in. (137 cm), 60 in. (152 cm)Z930R - 54 in. (137 cm), 60 in. (152 cm)
Z930M - 54 in. (137 cm), 60 in. (152 cm)Z950R - 60 in. (152 cm), 72 in. (183 cm)
Z945M EFI - 60 in. (152 cm)Z955R EFI - 60 in. (152 cm)
Z950M - 60 in. (152 cm), 72 in. (183 cm)Z970R - 60 in. (152 cm), 72 in. (183 cm)
Z955M EFI - 60 in. (152 cm), 72 in. (183 cm)
Z960M - 60 in. (152 cm), 72 in. (183 cm)

Mower deck step shown on 72-in. (183-cm) mowerMower deck step shown on 72-in. (183-cm) mower

The deck step safely aids the operator's entrance and egress from machine.

72-in. (183-cm) 7-Iron PRO deck shown72-in. (183-cm) 7-Iron PRO deck shown

The ZTrak™ M and R Series Mowers are equipped with either a side-discharge or Mulch On Demand™7-Iron PRO deck.

7-Iron PRO mower decks have demonstrated quality, performance, and durability. They deliver a high quality cut in diverse conditions.

Key features of the 7-Iron PRO mower deck:

  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break - it is stamped from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
  • The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Mower rectangular leading-edge reinforcementMower rectangular leading-edge reinforcement
Dual-captured anti-scalp wheelDual-captured anti-scalp wheel

Key features of the 7-Iron PRO mower deck:

  • Deck has rectangular leading deck edge reinforcement and the rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Dual-captured front and rear anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three 1-in. (2.5-cm), cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and is reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Three spindle grease fittings are accessible from the top.
  • Blade overlap is 1.6 in. (40.6 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO mower deck
M SeriesR Series
Z920M - 48 in. (122 cm), 54 in. (137 cm), 60 in. (152 cm)Z930R - 54 in. (137 cm), 60 in. (152 cm)
Z930M - 54 in. (137 cm), 60 in. (152 cm)Z950R - 60 in. (152 cm), 72 in. (183 cm)
Z945M EFI - 60 in. (152 cm)Z955R EFI - 60 in. (152 cm)
Z950M - 60 in. (152 cm), 72 in. (183 cm)Z970R - 60 in. (152 cm), 72 in. (183 cm)
Z955M EFI - 60 in. (152 cm), 72 in. (183 cm)
Z960M - 60 in. (152 cm), 72 in. (183 cm)

Mower deck step shown on 72-in. (183-cm) mowerMower deck step shown on 72-in. (183-cm) mower

The deck step safely aids the operator's entrance and egress from machine.

Available Mulch On Demand™ deck

Mulch On Demand mower deckMulch On Demand mower deck
Mower deck with chute closedMower deck with chute closed

TheMulch On Demand mower deck delivers unprecedented levels of productivity and versatility to commercial mower operation. With the ability to switch between side discharge and mulching operation with the flip of a lever as the operator mows, keeping most clippings out of landscaping features and where they are wanted is extremely easy.

Mulch On Demand openMulch On Demand open
Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)
Lever position open (latch standard on MCS-equipped models only)Lever position open (latch standard on MCS-equipped models only)
Lever position closedLever position closed

Key features of the 7-Iron™ PROMulch On Demand mower deck:

  • Deck can be converted from a wide-open side discharge mode to a fully chambered mulching mode with a single move of a lever.
    • NOTE: Mulch On Demand decks are a balance between a side discharge deck and a side discharge deck with a mulching kit.
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demanddecks are superior to aftermarket chute blockers due to the movable baffles.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • Rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Deep-deck design of 5.5 in. (14 cm)delivers excellent airflow so material can be processed quickly and efficiently.
  • Wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
  • Three 1-in. (2.5 cm)cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Dual-captured anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three greasable spindle zerks accessible from the top.
  • Blade overlap is 1.6 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO Mulch On Demand mower deck
M SeriesR Series
Z920M - 48-in. (122-cm) Mulch On DemandZ930R - 54-in. (137-cm) Mulch On Demand
Z930M - 54-in. (137-cm) Mulch On Demand
Z930M - 60-in. (152-cm) Mulch On Demand
Z950R - 60-in. (152-cm) Mulch On Demand
Z945M EFI - 60-in. (152-cm) Mulch On DemandZ970R - 60-in. (152-cm) Mulch On Demand
Z950M - 60-in. (152-cm) Mulch On Demand
Z955M EFI - 60-in. (152-cm) Mulch On Demand
Z960M - 60-in. (152-cm) Mulch On Demand
Mulch On Demand mower deckMulch On Demand mower deck
Mower deck with chute closedMower deck with chute closed

TheMulch On Demand mower deck delivers unprecedented levels of productivity and versatility to commercial mower operation. With the ability to switch between side discharge and mulching operation with the flip of a lever as the operator mows, keeping most clippings out of landscaping features and where they are wanted is extremely easy.

Mulch On Demand openMulch On Demand open
Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)Mulch On Demand closed (latch standard on material collection system [MCS] equipped models only)
Lever position open (latch standard on MCS-equipped models only)Lever position open (latch standard on MCS-equipped models only)
Lever position closedLever position closed

Key features of the 7-Iron™ PROMulch On Demand mower deck:

  • Deck can be converted from a wide-open side discharge mode to a fully chambered mulching mode with a single move of a lever.
    • NOTE: Mulch On Demand decks are a balance between a side discharge deck and a side discharge deck with a mulching kit.
  • Deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • Significantly fewer welds on the deck shell to wear or break- it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provides for easy machine mounting.
  • Mulch On Demanddecks are superior to aftermarket chute blockers due to the movable baffles.
  • Higher blade tip speed than many competitors - 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
  • Rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
  • Deep-deck design of 5.5 in. (14 cm)delivers excellent airflow so material can be processed quickly and efficiently.
  • Wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
  • Three 1-in. (2.5 cm)cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast aluminum providing both excellent strength and heat dissipation.
  • The front edge is raised above the blade plane to allow even cutting of tall grass and reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
  • Dual-captured anti-scalp wheels provide deck flotation over even the toughest terrain.
  • Three greasable spindle zerks accessible from the top.
  • Blade overlap is 1.6 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
  • Quick-change, cutting-height adjustment.
7-Iron PRO Mulch On Demand mower deck
M SeriesR Series
Z920M - 48-in. (122-cm) Mulch On DemandZ930R - 54-in. (137-cm) Mulch On Demand
Z930M - 54-in. (137-cm) Mulch On Demand
Z930M - 60-in. (152-cm) Mulch On Demand
Z950R - 60-in. (152-cm) Mulch On Demand
Z945M EFI - 60-in. (152-cm) Mulch On DemandZ970R - 60-in. (152-cm) Mulch On Demand
Z950M - 60-in. (152-cm) Mulch On Demand
Z955M EFI - 60-in. (152-cm) Mulch On Demand
Z960M - 60-in. (152-cm) Mulch On Demand

Three seat choices with ComfortGlide™ fore/aft suspension offer exceptional operator comfort

There are three seating options available for the MSeries, all of which are factory installed:

  1. Deluxe comfort seat with armrests
  2. Deluxe comfort seat with armrests and isolation
  3. Fully-adjustable suspension seat with armrests
ComfortGlide fore/aft suspension
ComfortGlide fore/aft suspension control leverComfortGlide fore/aft suspension control lever

Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:

  • Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
  • Control lever provides the ability to easily lock out fore/aft suspension movement if desired.
  • One lever has three functions.
    • Slide seat forward and back 3 in. (10.2 cm) to allow the operator the ability to choose the leg room needed
    • Activate ComfortGlide fore/aft seat suspension
    • Lock out ComfortGlide fore/aft seat suspension
Deluxe comfort seat with armrests
Deluxe comfort seat with armrests Deluxe comfort seat with armrests

The deluxe comfort seat with armrests is standard on all E and M Series models:

  • Rubber springs are provided to increase ride comfort.
  • A convenient seat latch makes it easy to lift the seat.
  • The seat is factory installed.
Deluxe comfort seat with armrests and isolation
Deluxe comfort seat with armrests and isolationDeluxe comfort seat with armrests and isolation
Rubber isolation mountRubber isolation mount

The deluxe comfort seat with armrests and isolation is available on the E, M, and R Series:

  • Rubber springs are provided to isolate the seat base and to increase ride comfort.
  • A convenient seat latch makes it easy to lift the seat.
  • Isolation mounting is a good feature to reduce vibration for operators who do not require the fully-adjustable suspension seat option.
  • Factory installed on Z900s ordered with the deluxe comfort seat with armrests and isolation option.
Fully adjustable suspension seat with armrests
Fully adjustable, mechanical suspension-seatFully adjustable, mechanical suspension-seat
Suspension seat controlSuspension seat control

A fully adjustable suspension seat with armrests option is available on the M and R Series:

  • Adjustable back angle is provided for individual operator comfort.
  • Adjustable lumbar support helps to suit the needs of the operator.
  • A suspension seat control dial gives easy adjustment for operator weight and ride comfort.
  • A convenient seat latch provides ease of lifting the seat
  • On Z900s ordered with the fully adjustable suspension seat with armrests option, it is factory installed.
Designed for operator comfort
Operator stationOperator station

Two-lever hydrostatic control provides the following:

  • The operator canselect the ground speed and direction control simply by moving levers forward or reverse.
  • Positive neutral lock position for levers provides added safety.
  • Brake & Go operator-presence system returns levers to the neutral position when the brake pedal is actively engaged.
  • Starting the machines is as easy as starting a car. It no longer matters if the control levers are extended out or pulled in, as long as the parking brake is engaged. Just turn the key and go.
  • Wide-bend, large-diameter steering levers swing out easily for entry and exit from the operator platform.
Brake & Go starting system
Parking brake pedal (Z900R Series)Parking brake pedal (Z900R Series)
Parking brake lever (Z900 E and M Series)Parking brake lever (Z900 E and M Series)

The Brake & Go starting system is a John Deere exclusive. This feature makes the starting process on all ZTrak™ mowers easier, while also making it possible to remove two interlock switches from the machine.

The Brake & Go starting procedure helps a novice operator look and feel like a professional. To start the machine, the parking brake must be engaged. It does not matter whether the power take-off (PTO) switch is on or off, nor does it matter if the control levers are pulled in or in the out position.

As long as the parking brake is engaged, the machine will start. When the parking brake is applied, the control levers cannot be moved to the forward or reverse positions.

Adjustable levers
Adjustable leversAdjustable levers

The motion control levers have two height positions and can also be adjusted forward or rearward within the slotted holes. The levers should be adjusted so the operator can achieve a full range of control operation comfortably.

Tracking adjustment
Tracking adjustmentTracking adjustment

The easy-to-turn (from-the-seat) tracking adjustment allows operators to keep their mowers straight andproduce professional striping results.

Onboard storage and cup holder
Onboard storageOnboard storage
Cup holderCup holder

Several storage areas are provided on theZTrak machines. A convenient cup holder is also available.

Right-hand control panel
Right-hand control panelRight-hand control panel
Right-hand control panelRight-hand control panel

The controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height-of-cut, diagnostics, and hourmeter.

  • Rocker-typePTO switch
  • Height-of-cut knob with transport lock
  • Key switch
  • Hourmeter
  • Throttle
  • Separate choke control
    • Easy choke operation yields less fouling of plugs
    • No choke required for the electronic fuel injection (EFI) models
Easy-to-operate height-of-cut adjustment enables on-the-go changes
Mower deck height adjustment knobMower deck height adjustment knob

An easy-to-use cutting-height lift system allows the operator to adjust the mower deck height with no tools and minimal effort. The easy-to-grip knob allows operators to dial in the desired height of cut (HOC).

Cutting height canbe adjusted from approximately 1 in. to 5.5 in. (2.5 cm to14 cm). Each increment on the knob adjusts the HOC approximately0.25 in. (0.64 cm). The deck can also be raised and locked in a transport position to provide maximum ground clearance when moving the machine from one area to another.

The transport lock function allows the deck to be returned to the previous HOC after being in the transport position:

  • Use the foot-lift pedal to lift the deck and engage the transport lock.
  • Rotate the knob to adjust from 1 in. to 5.5 in. (2.5 cm to 14 cm) in 0.25-in. (0.64 cm) increments.

This design increases productivity by allowing operators to change the cutting height without having to leave the seat.

There are three seating options available for the MSeries, all of which are factory installed:

  1. Deluxe comfort seat with armrests
  2. Deluxe comfort seat with armrests and isolation
  3. Fully-adjustable suspension seat with armrests
ComfortGlide fore/aft suspension
ComfortGlide fore/aft suspension control leverComfortGlide fore/aft suspension control lever

Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:

  • Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
  • Control lever provides the ability to easily lock out fore/aft suspension movement if desired.
  • One lever has three functions.
    • Slide seat forward and back 3 in. (10.2 cm) to allow the operator the ability to choose the leg room needed
    • Activate ComfortGlide fore/aft seat suspension
    • Lock out ComfortGlide fore/aft seat suspension
Deluxe comfort seat with armrests
Deluxe comfort seat with armrests Deluxe comfort seat with armrests

The deluxe comfort seat with armrests is standard on all E and M Series models:

  • Rubber springs are provided to increase ride comfort.
  • A convenient seat latch makes it easy to lift the seat.
  • The seat is factory installed.
Deluxe comfort seat with armrests and isolation
Deluxe comfort seat with armrests and isolationDeluxe comfort seat with armrests and isolation
Rubber isolation mountRubber isolation mount

The deluxe comfort seat with armrests and isolation is available on the E, M, and R Series:

  • Rubber springs are provided to isolate the seat base and to increase ride comfort.
  • A convenient seat latch makes it easy to lift the seat.
  • Isolation mounting is a good feature to reduce vibration for operators who do not require the fully-adjustable suspension seat option.
  • Factory installed on Z900s ordered with the deluxe comfort seat with armrests and isolation option.
Fully adjustable suspension seat with armrests
Fully adjustable, mechanical suspension-seatFully adjustable, mechanical suspension-seat
Suspension seat controlSuspension seat control

A fully adjustable suspension seat with armrests option is available on the M and R Series:

  • Adjustable back angle is provided for individual operator comfort.
  • Adjustable lumbar support helps to suit the needs of the operator.
  • A suspension seat control dial gives easy adjustment for operator weight and ride comfort.
  • A convenient seat latch provides ease of lifting the seat
  • On Z900s ordered with the fully adjustable suspension seat with armrests option, it is factory installed.
Designed for operator comfort
Operator stationOperator station

Two-lever hydrostatic control provides the following:

  • The operator canselect the ground speed and direction control simply by moving levers forward or reverse.
  • Positive neutral lock position for levers provides added safety.
  • Brake & Go operator-presence system returns levers to the neutral position when the brake pedal is actively engaged.
  • Starting the machines is as easy as starting a car. It no longer matters if the control levers are extended out or pulled in, as long as the parking brake is engaged. Just turn the key and go.
  • Wide-bend, large-diameter steering levers swing out easily for entry and exit from the operator platform.
Brake & Go starting system
Parking brake pedal (Z900R Series)Parking brake pedal (Z900R Series)
Parking brake lever (Z900 E and M Series)Parking brake lever (Z900 E and M Series)

The Brake & Go starting system is a John Deere exclusive. This feature makes the starting process on all ZTrak™ mowers easier, while also making it possible to remove two interlock switches from the machine.

The Brake & Go starting procedure helps a novice operator look and feel like a professional. To start the machine, the parking brake must be engaged. It does not matter whether the power take-off (PTO) switch is on or off, nor does it matter if the control levers are pulled in or in the out position.

As long as the parking brake is engaged, the machine will start. When the parking brake is applied, the control levers cannot be moved to the forward or reverse positions.

Adjustable levers
Adjustable leversAdjustable levers

The motion control levers have two height positions and can also be adjusted forward or rearward within the slotted holes. The levers should be adjusted so the operator can achieve a full range of control operation comfortably.

Tracking adjustment
Tracking adjustmentTracking adjustment

The easy-to-turn (from-the-seat) tracking adjustment allows operators to keep their mowers straight andproduce professional striping results.

Onboard storage and cup holder
Onboard storageOnboard storage
Cup holderCup holder

Several storage areas are provided on theZTrak machines. A convenient cup holder is also available.

Right-hand control panel
Right-hand control panelRight-hand control panel
Right-hand control panelRight-hand control panel

The controls are grouped together on the right console, providing one central location for key switch, throttle, PTO engagement, height-of-cut, diagnostics, and hourmeter.

  • Rocker-typePTO switch
  • Height-of-cut knob with transport lock
  • Key switch
  • Hourmeter
  • Throttle
  • Separate choke control
    • Easy choke operation yields less fouling of plugs
    • No choke required for the electronic fuel injection (EFI) models
Easy-to-operate height-of-cut adjustment enables on-the-go changes
Mower deck height adjustment knobMower deck height adjustment knob

An easy-to-use cutting-height lift system allows the operator to adjust the mower deck height with no tools and minimal effort. The easy-to-grip knob allows operators to dial in the desired height of cut (HOC).

Cutting height canbe adjusted from approximately 1 in. to 5.5 in. (2.5 cm to14 cm). Each increment on the knob adjusts the HOC approximately0.25 in. (0.64 cm). The deck can also be raised and locked in a transport position to provide maximum ground clearance when moving the machine from one area to another.

The transport lock function allows the deck to be returned to the previous HOC after being in the transport position:

  • Use the foot-lift pedal to lift the deck and engage the transport lock.
  • Rotate the knob to adjust from 1 in. to 5.5 in. (2.5 cm to 14 cm) in 0.25-in. (0.64 cm) increments.

This design increases productivity by allowing operators to change the cutting height without having to leave the seat.

Three-year, bumper-to-bumper warranty

Z955M ZTrak™ MowerZ955M ZTrak™ Mower
Z955R EFI ZTrak MowerZ955R EFI ZTrak Mower
E and M Series 3-year, 1500-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.

R Series 3-year, 1500-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard on all John Deere R Series mowers. The warranty is best in the industry and puts John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.

Mower decks are safety certified
Z950M ZTrak MowerZ950M ZTrak Mower

Mowers decks are evaluated by the manufacturer (John Deere Turf Care) and conform to American National Standards Institute (ANSI) B71.42004 safety certification specifications for commercial turf care equipment.

Z955M ZTrak™ MowerZ955M ZTrak™ Mower
Z955R EFI ZTrak MowerZ955R EFI ZTrak Mower
E and M Series 3-year, 1500-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.

R Series 3-year, 1500-hour bumper-to-bumper warranty

An exclusive 2-year, unlimited hour/3-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard on all John Deere R Series mowers. The warranty is best in the industry and puts John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.

NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.

Mower decks are safety certified
Z950M ZTrak MowerZ950M ZTrak Mower

Mowers decks are evaluated by the manufacturer (John Deere Turf Care) and conform to American National Standards Institute (ANSI) B71.42004 safety certification specifications for commercial turf care equipment.

Heavy-duty frame provides strength and durability

Z955R EFI model shown with optional X® Tweel® Turf airless radial tire technologyZ955R EFI model shown with optional X® Tweel® Turf airless radial tire technology

The durability features of the frame are as follows:

  • Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
  • Cast I-beam caster arms to handle the beating and pounding professional mowers receive
  • Wide-open access for maintenance and cleaning
Two-piece rear bumper provides protection
Illustration of ZTrak™ mower rear bumper Illustration of ZTrak™ mower rear bumper

A steel rear bumper provides protection for the machine. The bumper is made of two pieces, making it easy to remove and install when using a material collection system (MCS).

A rear hitch can be added tothesteel bumper for towing purposes. ZTrak E, M, and R Series Mowers can tow up to 400 lb (181.4 kg).

Z955R EFI model shown with optional X® Tweel® Turf airless radial tire technologyZ955R EFI model shown with optional X® Tweel® Turf airless radial tire technology

The durability features of the frame are as follows:

  • Heavy-duty, thick-gauge, steel channel mainframe for strength and durability
  • Cast I-beam caster arms to handle the beating and pounding professional mowers receive
  • Wide-open access for maintenance and cleaning
Two-piece rear bumper provides protection
Illustration of ZTrak™ mower rear bumper Illustration of ZTrak™ mower rear bumper

A steel rear bumper provides protection for the machine. The bumper is made of two pieces, making it easy to remove and install when using a material collection system (MCS).

A rear hitch can be added tothesteel bumper for towing purposes. ZTrak E, M, and R Series Mowers can tow up to 400 lb (181.4 kg).

Durable hydrostatic drive train that delivers better cooling and provides easy access

Heavy-duty ground driveHeavy-duty ground drive

The hydrostatic drive features two 13-cc (0.8-cu in.)unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit.

One pump and one motor drive each wheel on the ZTrak™E and M Series Mowers. This provides several benefits:

  • Exceptional cooling in high-load conditions
  • Easy-to-check level and refill hydraulic oil
  • Opens up access under the seat
Heavy-duty ground driveHeavy-duty ground drive

The hydrostatic drive features two 13-cc (0.8-cu in.)unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit.

One pump and one motor drive each wheel on the ZTrak™E and M Series Mowers. This provides several benefits:

  • Exceptional cooling in high-load conditions
  • Easy-to-check level and refill hydraulic oil
  • Opens up access under the seat

Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation

Flat-free rear tire shown on ZTrak™ Mower Flat-free rear tire shown on ZTrak™ Mower

John Deere provides the commercial mower industry withthe Michelin X Tweel Turf technology forCommercial ZTrak Mowers:

  • 24x12N12 as an ordering option code for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks
    • 24x12N12 is also available as base code equipment for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks (ordering information available at Configurator on the Tweel model page)
  • 24x12N12 as an ordering option code for ZTrak Z994R Diesel with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks
  • 26x12N12 as an ordering option code for Z997R Diesel with 60 in. and 72 in. (152-cm and 183-cm) Mower Decks

Michelin is a world leader in tire manufacturing and technology. This airless radial tire solution is an industry firstfor John Deere, which provides an additional advantage to John Deere customers.

Advantages of the MichelinX Tweel Turf include:

  • Mowing performance is improved.
    • Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact.
    • Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires.
    • Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility.
    • More consistent cut quality is achieved because inconsistent tire pressure is eliminated.
  • Uptime is improved.
    • The exclusive technology eliminates downtime and associated cost due to flat or damaged tires.
    • Punctures and sidewall damage no longer result in downtime.
  • Cost of operation is reduced.
    • Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment.
    • No need to spend time checking and optimizing tire pressure.
    • The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them.
    • The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread.
Michelin X Tweel Turf Michelin X Tweel Turf
Michelin X Tweel Turf Michelin X Tweel Turf

Heavy-duty construction provides the ultimate in performance and reliable operation:

  • High-strength poly-resin spokes carry the load.
  • Four-hole, heavy-duty steel hub for durability.
  • Deep, open-tread design provides excellent cleaning and traction.
  • Zero degree, high-tensile proprietary carcass provides great lateral stiffness while resisting damage from impact and penetration.

NOTE: In some cases, different size Tweel tires are required depending on the mower deck size.

Tires deliver exceptional traction and maneuverability
Drive tireDrive tire
Front caster tireFront caster tire

The ZTrak™ M Series Mowers with 48-in. (122-cm) mower decks come with 24x9.5-12 4 PR drive tires. M Series Mowers with 54-in. (137-cm), 60-in. (152-cm), and 72-in. (183-cm)decks come with 24x12-12 4 PR drive tires. All M Series Mowers are equipped with 13x6.5-6 front flat-free semi-pneumatic caster tires for the following:

  • Excellent traction, flotation, and curb climbing
  • Low center of gravity to increase hillside mowing capability
  • Caster wheels and caster wheel towers with sealed bearings for long life and easy steering
  • Offset front caster wheels to help improve theinside corner-trim performance and also reduce between-blade striping

Michelin, X,and Tweel are trademarks of Michelin North America, Inc.

Flat-free rear tire shown on ZTrak™ Mower Flat-free rear tire shown on ZTrak™ Mower

John Deere provides the commercial mower industry withthe Michelin X Tweel Turf technology forCommercial ZTrak Mowers:

  • 24x12N12 as an ordering option code for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks
    • 24x12N12 is also available as base code equipment for ZTrak Gas Mowers with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks (ordering information available at Configurator on the Tweel model page)
  • 24x12N12 as an ordering option code for ZTrak Z994R Diesel with 54 in., 60 in., and 72 in. (137-cm, 152-cm, and 183-cm) Mower Decks
  • 26x12N12 as an ordering option code for Z997R Diesel with 60 in. and 72 in. (152-cm and 183-cm) Mower Decks

Michelin is a world leader in tire manufacturing and technology. This airless radial tire solution is an industry firstfor John Deere, which provides an additional advantage to John Deere customers.

Advantages of the MichelinX Tweel Turf include:

  • Mowing performance is improved.
    • Rutting is reduced because the Michelin X Tweel Turf has more support across the surface for improved flotation and better ground contact.
    • Unique energy transfer within the poly-resin spokes reduces the bounce associated with pneumatic tires.
    • Excellent curb climbing is possible due to the Michelin X Tweel Turf construction and flexibility.
    • More consistent cut quality is achieved because inconsistent tire pressure is eliminated.
  • Uptime is improved.
    • The exclusive technology eliminates downtime and associated cost due to flat or damaged tires.
    • Punctures and sidewall damage no longer result in downtime.
  • Cost of operation is reduced.
    • Cost of repairs and maintenance is reduced. One single unit replaces the current tire, wheel, and valve assembly. There is no need for complex tire-mounting equipment.
    • No need to spend time checking and optimizing tire pressure.
    • The need to purchase and stock plug kits and spare tires is eliminated, particularly for professional landscape contractors and government agencies who normally stock them.
    • The tire tread will last up to three times longer than current pneumatic tires because automotive-grade rubber is used for the tread.
Michelin X Tweel Turf Michelin X Tweel Turf
Michelin X Tweel Turf Michelin X Tweel Turf

Heavy-duty construction provides the ultimate in performance and reliable operation:

  • High-strength poly-resin spokes carry the load.
  • Four-hole, heavy-duty steel hub for durability.
  • Deep, open-tread design provides excellent cleaning and traction.
  • Zero degree, high-tensile proprietary carcass provides great lateral stiffness while resisting damage from impact and penetration.

NOTE: In some cases, different size Tweel tires are required depending on the mower deck size.

Tires deliver exceptional traction and maneuverability
Drive tireDrive tire
Front caster tireFront caster tire

The ZTrak™ M Series Mowers with 48-in. (122-cm) mower decks come with 24x9.5-12 4 PR drive tires. M Series Mowers with 54-in. (137-cm), 60-in. (152-cm), and 72-in. (183-cm)decks come with 24x12-12 4 PR drive tires. All M Series Mowers are equipped with 13x6.5-6 front flat-free semi-pneumatic caster tires for the following:

  • Excellent traction, flotation, and curb climbing
  • Low center of gravity to increase hillside mowing capability
  • Caster wheels and caster wheel towers with sealed bearings for long life and easy steering
  • Offset front caster wheels to help improve theinside corner-trim performance and also reduce between-blade striping

Michelin, X,and Tweel are trademarks of Michelin North America, Inc.

Mower is easy to service with many accessible components

Z955R EFI left front viewZ955R EFI left front view

The design of theZ900 Seriesmakes many service components reachable and easily accessible from the ground.

  • Large, open engine compartment at the rear of the machine provides convenient servicing and ensures the engine heat is directed away from the operator.
Flip-up foot panelFlip-up foot panel
Flip-up seatFlip-up seat
Onboard maintenance chart
Maintenance chartMaintenance chart

All ZTrak™ Mowers come with an onboard maintenance chartthat is conveniently located inside the right-hand console. The service interval chart gives necessary service intervals.

Diagnostics
Hour meter (M Series pictured)Hour meter (M Series pictured)
Diagnostic chartDiagnostic chart

The hour meter shows the number of hours the machine is run when the key switch is in the on position. It only counts thehours the engine is actually running. Machine diagnostics are the first step of a monitoring system to help operators quickly diagnose common downtime issues. A trouble code light is included on the hour meter.

Useof the hour meter and service interval charthelps determine when the machine will need service.

Rollover protective structure (ROPS) enhances operator safety
ROPS upROPS up
ROPS mid positionROPS mid position
ROPS down positionROPS down position

The ZTrak™ Z900E, M, and R Series Mowers are equipped with a standard two-post foldingROPS and seat belt. The folding ROPS enhances operator safety and provides ample clearance when storing the mower in garages or sheds:

  • ISO21299 certification
  • Foldable

The ROPS system can be repositioned without the use of tools. Under normal operation, the ROPS should be in the up position. If operating in low clearance areas, they can be folded and secured out of the way. The ROPS can also be pinned halfway down to accommodate machines equipped with a material collection system.

Z955R EFI left front viewZ955R EFI left front view

The design of theZ900 Seriesmakes many service components reachable and easily accessible from the ground.

  • Large, open engine compartment at the rear of the machine provides convenient servicing and ensures the engine heat is directed away from the operator.
Flip-up foot panelFlip-up foot panel
Flip-up seatFlip-up seat
Onboard maintenance chart
Maintenance chartMaintenance chart

All ZTrak™ Mowers come with an onboard maintenance chartthat is conveniently located inside the right-hand console. The service interval chart gives necessary service intervals.

Diagnostics
Hour meter (M Series pictured)Hour meter (M Series pictured)
Diagnostic chartDiagnostic chart

The hour meter shows the number of hours the machine is run when the key switch is in the on position. It only counts thehours the engine is actually running. Machine diagnostics are the first step of a monitoring system to help operators quickly diagnose common downtime issues. A trouble code light is included on the hour meter.

Useof the hour meter and service interval charthelps determine when the machine will need service.

Rollover protective structure (ROPS) enhances operator safety
ROPS upROPS up
ROPS mid positionROPS mid position
ROPS down positionROPS down position

The ZTrak™ Z900E, M, and R Series Mowers are equipped with a standard two-post foldingROPS and seat belt. The folding ROPS enhances operator safety and provides ample clearance when storing the mower in garages or sheds:

  • ISO21299 certification
  • Foldable

The ROPS system can be repositioned without the use of tools. Under normal operation, the ROPS should be in the up position. If operating in low clearance areas, they can be folded and secured out of the way. The ROPS can also be pinned halfway down to accommodate machines equipped with a material collection system.

Spindle assembly provides greater performance and reliability

Spindle assemblySpindle assembly

On every John Deere ZTrak™ mower deck, there are three 1-in. (2.5-cm) spindles that are cold-forged and heat-treated for strength without bulk. The spindles are supported by precision ball bearings, providing great performance and reliability.

The spindle housing is made of aircraft-grade, ribbed cast aluminum on 48-in., 54-in., and 60-in. (122-cm, 137-cm, and 152-cm) decks, including Mulch On Demand™ configurations. This unique casting design embosses reinforcing gussets in the housing, which adds both strength and cooling surface area that stands up to commercial applications.

These spindles can be greased from the top and require no disassembly to reach. Grease channels provide lubrication to both bearings.

Spindle assemblySpindle assembly

On every John Deere ZTrak™ mower deck, there are three 1-in. (2.5-cm) spindles that are cold-forged and heat-treated for strength without bulk. The spindles are supported by precision ball bearings, providing great performance and reliability.

The spindle housing is made of aircraft-grade, ribbed cast aluminum on 48-in., 54-in., and 60-in. (122-cm, 137-cm, and 152-cm) decks, including Mulch On Demand™ configurations. This unique casting design embosses reinforcing gussets in the housing, which adds both strength and cooling surface area that stands up to commercial applications.

These spindles can be greased from the top and require no disassembly to reach. Grease channels provide lubrication to both bearings.

Field-installed propane conversion kits for Commercial Walk-Behind Mowers, QuikTrak™ Mowers, and Commercial ZTrak™ Mowers