5095M

Utility Tractor

  • 70.8 kW (95 hp) 4-cyl. John Deere PowerTech M 4.5 L diesel engine
  • 16F/16R or 32F/16R PowrReverser transmission
  • Open station or cab
  • MFWD

Features

16F/16R PowrReverser™ transmission is ideal for demanding applications

Electrohydraulic reverser lever Electrohydraulic reverser lever

The PowrReverser transmission provides 16 forward speeds and 16 reverse speeds. This transmission comes standard with shiftable 540/540 Economy power take-off(PTO), and is ideal for operators using their tractors to perform indemanding applications and who require additional operating speed ranges.

Hydraulic wet forward and reverse clutches maximize durability and outlast the life of any dry clutch. When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs.

Two platform-mounted levers offer easy and comfortable shifting for a pleasantoperator experience. The gear-shift lever is easy to reach and the less-used range lever is now shorter.

Unique knobs make it easy to distinguish between the two. The forward lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. The rear lever selects collar-shift A, B, C, and D.

Maximum productivity is achieved with hydraulic powershift between forward and reverse and is ideal for loader work and any applications that require frequent directional switches in tight spaces.

Excellent modulation allows the operator to shift the direction lever from neutral to forward or reverse, forward to reverse, reverse to forward, or to neutral from forward or reverse. Operators can accomplish all these directional changes without sacrificing comfort or dealing with the hassle of depressing the clutch pedal. The speed of directional changes can be adjusted to the operator's preference or application demands with the field-installedinfinitely variable control kit.

An electrohydraulic fingertip directional lever control allows the operator to effortlessly switch directions with a small finger motion. The control is located on the left side of the instrument console and selects forward, reverse, and neutral positions. It also allows the operator to steer and shift direction with the left hand, freeing the right hand to operate other tractor controls, such as the loader, rear implements, or hand throttle.

Constant-mesh helical-cut gears provide quieter operation and excellent reliability while the pressure-lubricated top shaft adds to the transmission durability.

Fully enclosed, rigid shift linkages for short throw and crisp shifts enable all operators to clearly know what range and gear in which they are operating.

Positive park pawl on the transmission provides positivepark and eliminates the need for a hand brake. This also eliminates clutch service costs that occur when the park brake is accidentally left engaged.

A neutral start switch requires the directional lever be in the neutral position to start the engine.

Electrohydraulic reverser lever Electrohydraulic reverser lever

The PowrReverser transmission provides 16 forward speeds and 16 reverse speeds. This transmission comes standard with shiftable 540/540 Economy power take-off(PTO), and is ideal for operators using their tractors to perform indemanding applications and who require additional operating speed ranges.

Hydraulic wet forward and reverse clutches maximize durability and outlast the life of any dry clutch. When tractors are run by multiple operators with a variety of experience levels, a wet clutch is the best way to maintain transmission integrity and performance while decreasing clutch replacement costs.

Two platform-mounted levers offer easy and comfortable shifting for a pleasantoperator experience. The gear-shift lever is easy to reach and the less-used range lever is now shorter.

Unique knobs make it easy to distinguish between the two. The forward lever selects one of four speeds, all synchronized shifts for on-the-go shifting with the use of the clutch. The rear lever selects collar-shift A, B, C, and D.

Maximum productivity is achieved with hydraulic powershift between forward and reverse and is ideal for loader work and any applications that require frequent directional switches in tight spaces.

Excellent modulation allows the operator to shift the direction lever from neutral to forward or reverse, forward to reverse, reverse to forward, or to neutral from forward or reverse. Operators can accomplish all these directional changes without sacrificing comfort or dealing with the hassle of depressing the clutch pedal. The speed of directional changes can be adjusted to the operator's preference or application demands with the field-installedinfinitely variable control kit.

An electrohydraulic fingertip directional lever control allows the operator to effortlessly switch directions with a small finger motion. The control is located on the left side of the instrument console and selects forward, reverse, and neutral positions. It also allows the operator to steer and shift direction with the left hand, freeing the right hand to operate other tractor controls, such as the loader, rear implements, or hand throttle.

Constant-mesh helical-cut gears provide quieter operation and excellent reliability while the pressure-lubricated top shaft adds to the transmission durability.

Fully enclosed, rigid shift linkages for short throw and crisp shifts enable all operators to clearly know what range and gear in which they are operating.

Positive park pawl on the transmission provides positivepark and eliminates the need for a hand brake. This also eliminates clutch service costs that occur when the park brake is accidentally left engaged.

A neutral start switch requires the directional lever be in the neutral position to start the engine.

Deluxe open operator station (DOOS) offers a smooth, spacious operating experience

Deluxe open operator station Deluxe open operator station

The fully isolated design of the deluxe open operator station (DOOS) reduces vibration and noise, and keeps the operator comfortable throughout the workday.

It also improves ride and visibility. Platform-mounted shift levers and suspended clutch and brake pedals contribute to a clean platform design and make it easier for the operator to get on and off the tractor.

Deluxe open operator station right-hand controlsDeluxe open operator station right-hand controls
Debris deflectorDebris deflector

Debris deflectors, fender extensions, fender-mounted work lights, and floor mats are base equipment on the deluxe isolated open operator station.

Controls are spaced out for clear and concise execution by the operator.

Color-coded bands on the selective control valve (SCV) levers correspond with the color on the rear SCVs, making it easy for any operator to determine which lever operates which rear SCV.

A conveniently placed, contoured throttleenables easy operator adjustments.

Deluxe seat Deluxe seat

A deluxe adjustable vinyl seat is standard on the isolated open operator stations. Ergonomically designed seat cushioning and support provide unsurpassed operator comfort; this is the same basic seat used in cab tractors (cloth covered).

Making fore-aft adjustments is easy using a lever located to the operator's right. The height adjustment is accomplished without tools and four possible positions set the limit for how high the seat will travel.

Weight/suspension adjustment is easily accomplished from the seat, which adjusts to the operator's weight (100 lb to 275 lb; 45 kg to 125 kg). When the suspension is set to the weight of the operator, the indicated height setting appears through a display window. This allows the operator to set the seat suspension at its mid-point of travel.

Armrests come standard with the DOOS seat and are adjustable. The backrest angle is adjustable with a lever in the lower-left corner of the seat cushion, and retractable seat belts are easily accessible. Operators can get even more comfortable with a field-installed backrest extension.

Deluxe open operator station Deluxe open operator station

The fully isolated design of the deluxe open operator station (DOOS) reduces vibration and noise, and keeps the operator comfortable throughout the workday.

It also improves ride and visibility. Platform-mounted shift levers and suspended clutch and brake pedals contribute to a clean platform design and make it easier for the operator to get on and off the tractor.

Deluxe open operator station right-hand controlsDeluxe open operator station right-hand controls
Debris deflectorDebris deflector

Debris deflectors, fender extensions, fender-mounted work lights, and floor mats are base equipment on the deluxe isolated open operator station.

Controls are spaced out for clear and concise execution by the operator.

Color-coded bands on the selective control valve (SCV) levers correspond with the color on the rear SCVs, making it easy for any operator to determine which lever operates which rear SCV.

A conveniently placed, contoured throttleenables easy operator adjustments.

Deluxe seat Deluxe seat

A deluxe adjustable vinyl seat is standard on the isolated open operator stations. Ergonomically designed seat cushioning and support provide unsurpassed operator comfort; this is the same basic seat used in cab tractors (cloth covered).

Making fore-aft adjustments is easy using a lever located to the operator's right. The height adjustment is accomplished without tools and four possible positions set the limit for how high the seat will travel.

Weight/suspension adjustment is easily accomplished from the seat, which adjusts to the operator's weight (100 lb to 275 lb; 45 kg to 125 kg). When the suspension is set to the weight of the operator, the indicated height setting appears through a display window. This allows the operator to set the seat suspension at its mid-point of travel.

Armrests come standard with the DOOS seat and are adjustable. The backrest angle is adjustable with a lever in the lower-left corner of the seat cushion, and retractable seat belts are easily accessible. Operators can get even more comfortable with a field-installed backrest extension.

Climate-controlled cabs achieve the smoothest, quietest operating experience for increased performance

The operator of a 5M Series cab will appreciate the reduction in noise and vibration through the seat, steering wheel, and lever controls with a rollover protective structure (ROPS) certified, factory-installed cab.

The cabs are assembled to the tractor chassis as a complete unit and mounted on composite isolators. This system of assembly and mounting is similar to the successful mounting methods of the larger-horsepower tractors in the John Deere agricultural tractor family.

The complete cab assembly includes the floor and steering column. Having this type of fully isolated cab, greatly reduces noise levels inside the cab. It also creates a more sealed environment so the amount of airborne particles entering the cab, such as dust and pollen, are greatly reduced.

The cab is very roomy, allowing ample space for controls and storage. The flat floor adds to the spacious, open feel. The ceiling control panel is located on the upper right side, and theair-conditioner components are located on the upper-rear corners of the cab where visibility is not as critical. This provides the operator with visibility to the loader at a height unmatched by any competitor.

The perfect operator environment

5M Series cabs provide a clean, quiet environment protected from the elements. Powerful air-conditioning and heating systems allow the operator to control the cab climate to preference, regardless of the conditions outside. The standard visor blocks the sun on bright days, while a dome light allows the operator to see controls at all times of the day.

The cab's side windows open forward for excellent ventilation, and right- and left-side doors open wide for easy entry and egress. For excellent rear visibility, the fuel tank is located below the left-hand side of the platform. The rear window opens to 70 degrees, providing further visibility to the operator when hooking up implements. An interior rearview mirror provides additional visibility.

A tilt and telescoping steering column provides a custom fit for each operator. The clean, uncluttered interior design with flat platform maximises operator space, and a conveniently located beverage holder provides space for the operator's drink of choice.

All cab trim levels also come standard with a storage drawer underneath the seat, floor mat and a coat hook for added comfort and convenience.

Storage drawerStorage drawer
Coat hookCoat hook
Rear floor matRear floor mat
Operating features and solutions

Excellent overall visibility in all applications with a swing-out rear window opens to a full 70 degrees for easier implement hookup and visibility. A front windshield wiper with washer ensures the operator can see the surroundings of the tractor. A rear window wiper is also available ex-factory as well as through attachments.

Excellent night visibility is achieved with a full lighting package, and work lights are easily adjusted to redirect light without tools.

There is a convenient three-pin power outlet for monitor, controllers, and other operating necessities. Four sets of mounting bosses and a removable rear access plug for monitor or controller harnesses also make using a monitor easy.

A rear seven-pin electrical outlet socket for implement electrical requirements and a 120-amp alternator handles increased electrical requirements. To handle increased powertrain and hydraulic requirements in severe conditions, a hydraulic oil cooler is standard.

The battery is located in the front of the tractor for easy access. Fenders are designed to provide plenty of tire clearance, even with the largest wheel-tire combinations.

Additional features are as follows:

  • Rollover protective structure (ROPS) - certified structure for operator protection
  • Tempered safety glass in case of breakage
  • Transport - two front and two rear
  • Two fender-mounted taillights for road transport
  • Two large cleated steps on each side
Deluxe adjustable cloth seat
Deluxe adjustable cloth seatDeluxe adjustable cloth seat

A deluxe, adjustable cloth seat is standard with cab tractors. Ergonomically designed seat cushioning and support provide unsurpassed operator comfort. This is the same basic seat used with vinyl covering for the isolated open operator station tractors.

Fore-aft adjustment is easy using a lever located at the operator's right-hand side. Height adjustment is accomplished without tools, and four possible positions set the limit for how high the seat will travel.

Weight-suspension adjustment is easily accomplished from the seat, which adjusts to the operator's weight (100 lb to 275 lb). When the suspension is set to the weight of the operator, the indicated height setting appears through a display window. This allows the operator to set the seat suspension at its mid-point of travel.

Armrests come standard with the seat and are adjustable. The backrest angle is adjustable with a lever in the lower-left corner of the seat cushion, and retractable seat belts are easily accessible. Operators can get even more comfortable with a field-installed backrest extension or lumbar and attenuation.

Cab tractors can also be equipped with an optional air-suspension seat.

The operator of a 5M Series cab will appreciate the reduction in noise and vibration through the seat, steering wheel, and lever controls with a rollover protective structure (ROPS) certified, factory-installed cab.

The cabs are assembled to the tractor chassis as a complete unit and mounted on composite isolators. This system of assembly and mounting is similar to the successful mounting methods of the larger-horsepower tractors in the John Deere agricultural tractor family.

The complete cab assembly includes the floor and steering column. Having this type of fully isolated cab, greatly reduces noise levels inside the cab. It also creates a more sealed environment so the amount of airborne particles entering the cab, such as dust and pollen, are greatly reduced.

The cab is very roomy, allowing ample space for controls and storage. The flat floor adds to the spacious, open feel. The ceiling control panel is located on the upper right side, and theair-conditioner components are located on the upper-rear corners of the cab where visibility is not as critical. This provides the operator with visibility to the loader at a height unmatched by any competitor.

The perfect operator environment

5M Series cabs provide a clean, quiet environment protected from the elements. Powerful air-conditioning and heating systems allow the operator to control the cab climate to preference, regardless of the conditions outside. The standard visor blocks the sun on bright days, while a dome light allows the operator to see controls at all times of the day.

The cab's side windows open forward for excellent ventilation, and right- and left-side doors open wide for easy entry and egress. For excellent rear visibility, the fuel tank is located below the left-hand side of the platform. The rear window opens to 70 degrees, providing further visibility to the operator when hooking up implements. An interior rearview mirror provides additional visibility.

A tilt and telescoping steering column provides a custom fit for each operator. The clean, uncluttered interior design with flat platform maximises operator space, and a conveniently located beverage holder provides space for the operator's drink of choice.

All cab trim levels also come standard with a storage drawer underneath the seat, floor mat and a coat hook for added comfort and convenience.

Storage drawerStorage drawer
Coat hookCoat hook
Rear floor matRear floor mat
Operating features and solutions

Excellent overall visibility in all applications with a swing-out rear window opens to a full 70 degrees for easier implement hookup and visibility. A front windshield wiper with washer ensures the operator can see the surroundings of the tractor. A rear window wiper is also available ex-factory as well as through attachments.

Excellent night visibility is achieved with a full lighting package, and work lights are easily adjusted to redirect light without tools.

There is a convenient three-pin power outlet for monitor, controllers, and other operating necessities. Four sets of mounting bosses and a removable rear access plug for monitor or controller harnesses also make using a monitor easy.

A rear seven-pin electrical outlet socket for implement electrical requirements and a 120-amp alternator handles increased electrical requirements. To handle increased powertrain and hydraulic requirements in severe conditions, a hydraulic oil cooler is standard.

The battery is located in the front of the tractor for easy access. Fenders are designed to provide plenty of tire clearance, even with the largest wheel-tire combinations.

Additional features are as follows:

  • Rollover protective structure (ROPS) - certified structure for operator protection
  • Tempered safety glass in case of breakage
  • Transport - two front and two rear
  • Two fender-mounted taillights for road transport
  • Two large cleated steps on each side
Deluxe adjustable cloth seat
Deluxe adjustable cloth seatDeluxe adjustable cloth seat

A deluxe, adjustable cloth seat is standard with cab tractors. Ergonomically designed seat cushioning and support provide unsurpassed operator comfort. This is the same basic seat used with vinyl covering for the isolated open operator station tractors.

Fore-aft adjustment is easy using a lever located at the operator's right-hand side. Height adjustment is accomplished without tools, and four possible positions set the limit for how high the seat will travel.

Weight-suspension adjustment is easily accomplished from the seat, which adjusts to the operator's weight (100 lb to 275 lb). When the suspension is set to the weight of the operator, the indicated height setting appears through a display window. This allows the operator to set the seat suspension at its mid-point of travel.

Armrests come standard with the seat and are adjustable. The backrest angle is adjustable with a lever in the lower-left corner of the seat cushion, and retractable seat belts are easily accessible. Operators can get even more comfortable with a field-installed backrest extension or lumbar and attenuation.

Cab tractors can also be equipped with an optional air-suspension seat.

John Deere PowerTech™ 4-cylinder diesel engines create outstanding performance, durability, and the best operating experience

Outstanding performance and durability

John Deere-designed and -manufactured diesel engines provideexcellent torque, fuel efficiency, and durability.

Turbocharged, air-to-air aftercooled

Turbocharged engines supply more air to the combustion chamber since the air is pre-compressed. The increased amount of air allows a corresponding increase in fuel injection whichresults in greater engine performance.

Air-to-air aftercooling is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. Air-to-air aftercoolers allow engines to meet emissions regulations with better fuel economy.

Heavy-duty cylinder block

The heavy-duty cylinder block provides greater strength and rigidity, which is what allows these tractors to perform in ditches, ravines, and other less-than-ideal conditions.

Balanced crankshaft

Statically- and dynamically-balanced crankshaftreduces engine vibration.The operator's body absorbs less vibration allowing them to stay attentive and consistent throughout the work day.

Cast-aluminum pistons

High-ring piston design reduces the non-usable air in the combustion area of the cylinders for improved fuel efficiency and combustion so operators receive the most power from every engine stroke.Ni-resist inserts reduce ring groove wear, which would lead to less effective combustion, so operators have an engine that is proactive for performance.

Tee-pee connecting rods and keystone-shaped top rings

Tee-pee connecting rods provide increased strength and durability of both the connecting rod and the pistons, which allows operators to run in a wide array of conditions.

Keystone-shaped top rings move slightly in the groove to clean the carbon deposits, conditioning the tractor to remain ready to work.Plasma-coated for reduced drag on cylinder wall and increasing overall tractor life.

Wet-type cylinder liners

Cylinder liners dissipate heat to prevent cylinder distortion and rapid ring wear, allowing operators to see consistent performance.Certified JohnDeere technicians can easily restore engine to theoriginal specifications after many hours of hard operation.This extends the yearsofperformance.

Full-pressure lubrication system
Piston-cooling jetsPiston-cooling jets

Full-pressure lubrication system ultimately protects your wallet from maintenance costs.The underside of each piston and piston pin is sprayed with cooled and filtered oil, which eliminates excessive heat for longer life. The full-flow filterallows the cleanest fuel to be delivered to the engine for maximum performance and filter bypass so the tractor will never be starved for oil due to an exhausted filter.

Engine oil cooler

Engine oil cooler provides additional engine oil cooling, allowing operators to run in severe applications, reducing the likelihood that the engine will overheat.

Operate safely with the neutral start switch and electric fuel shutoff

Aneutral start switch ensures operator and bystander safety,the right-hand gear shift lever must be in the park or neutral position for the engine to start.

Electric fuel shutoffallows the operator to easily turn the tractor off with the key, just like an automobile. A solenoid on the injection pump permits using a key instead of a push-pull cable to shut off the engine. The electric fuel shutoff does not allow bypass starting.If an attempt is made to bypass start the tractor, through the use of electronics,the electric fuel shutoff will not allow the engine to start.

Dry-type air cleaner

A dry-type air cleaner has a dual-element design for added engine protection against dust or debris from entering the combustion chamber, ensuring performance time opposed to shop time.Reaching the filter for service is easy, the operator simply unlatches three clips.A restriction indicator light on the dash alerts the operator when servicing is required to save potential engine repairs.

Single-element fuel filter

A single-element fuel filter partners up with the hand primer and water sediment bowl to deliver the complete package. JohnDeere designed specifically to meet the needs of JohnDeere tractors, the fuel filter provides a hand primer to prime the system for an easy fix for any operator who gets busy working and forgets to fuel up.The water separator stores water separated from the fuel to protect from the cost of replacing the fuel injection pumpdue to water contamination.

Automotive-style poly-V fan drive belt

The automotive-style fan drive belt drives the fan, water pump, and alternator.The belt features a self-adjusting spring tensioner, which eliminates service tasks, the need for a wrench, and extends the life of the belt because it is always in the correct adjustment.

Approved fuel

Theuse of biodiesel fuel up to 20% (B20) concentration is approved. Biodiesel fuel needs to meet ASTM PS 121 or DIN 51606 specifications.Alocal fuel supplier can providespecifications.

Outstanding performance and durability

John Deere-designed and -manufactured diesel engines provideexcellent torque, fuel efficiency, and durability.

Turbocharged, air-to-air aftercooled

Turbocharged engines supply more air to the combustion chamber since the air is pre-compressed. The increased amount of air allows a corresponding increase in fuel injection whichresults in greater engine performance.

Air-to-air aftercooling is the most efficient method of cooling intake air to help reduce engine emissions while maintaining low-speed torque, transient response time, and peak torque. Air-to-air aftercoolers allow engines to meet emissions regulations with better fuel economy.

Heavy-duty cylinder block

The heavy-duty cylinder block provides greater strength and rigidity, which is what allows these tractors to perform in ditches, ravines, and other less-than-ideal conditions.

Balanced crankshaft

Statically- and dynamically-balanced crankshaftreduces engine vibration.The operator's body absorbs less vibration allowing them to stay attentive and consistent throughout the work day.

Cast-aluminum pistons

High-ring piston design reduces the non-usable air in the combustion area of the cylinders for improved fuel efficiency and combustion so operators receive the most power from every engine stroke.Ni-resist inserts reduce ring groove wear, which would lead to less effective combustion, so operators have an engine that is proactive for performance.

Tee-pee connecting rods and keystone-shaped top rings

Tee-pee connecting rods provide increased strength and durability of both the connecting rod and the pistons, which allows operators to run in a wide array of conditions.

Keystone-shaped top rings move slightly in the groove to clean the carbon deposits, conditioning the tractor to remain ready to work.Plasma-coated for reduced drag on cylinder wall and increasing overall tractor life.

Wet-type cylinder liners

Cylinder liners dissipate heat to prevent cylinder distortion and rapid ring wear, allowing operators to see consistent performance.Certified JohnDeere technicians can easily restore engine to theoriginal specifications after many hours of hard operation.This extends the yearsofperformance.

Full-pressure lubrication system
Piston-cooling jetsPiston-cooling jets

Full-pressure lubrication system ultimately protects your wallet from maintenance costs.The underside of each piston and piston pin is sprayed with cooled and filtered oil, which eliminates excessive heat for longer life. The full-flow filterallows the cleanest fuel to be delivered to the engine for maximum performance and filter bypass so the tractor will never be starved for oil due to an exhausted filter.

Engine oil cooler

Engine oil cooler provides additional engine oil cooling, allowing operators to run in severe applications, reducing the likelihood that the engine will overheat.

Operate safely with the neutral start switch and electric fuel shutoff

Aneutral start switch ensures operator and bystander safety,the right-hand gear shift lever must be in the park or neutral position for the engine to start.

Electric fuel shutoffallows the operator to easily turn the tractor off with the key, just like an automobile. A solenoid on the injection pump permits using a key instead of a push-pull cable to shut off the engine. The electric fuel shutoff does not allow bypass starting.If an attempt is made to bypass start the tractor, through the use of electronics,the electric fuel shutoff will not allow the engine to start.

Dry-type air cleaner

A dry-type air cleaner has a dual-element design for added engine protection against dust or debris from entering the combustion chamber, ensuring performance time opposed to shop time.Reaching the filter for service is easy, the operator simply unlatches three clips.A restriction indicator light on the dash alerts the operator when servicing is required to save potential engine repairs.

Single-element fuel filter

A single-element fuel filter partners up with the hand primer and water sediment bowl to deliver the complete package. JohnDeere designed specifically to meet the needs of JohnDeere tractors, the fuel filter provides a hand primer to prime the system for an easy fix for any operator who gets busy working and forgets to fuel up.The water separator stores water separated from the fuel to protect from the cost of replacing the fuel injection pumpdue to water contamination.

Automotive-style poly-V fan drive belt

The automotive-style fan drive belt drives the fan, water pump, and alternator.The belt features a self-adjusting spring tensioner, which eliminates service tasks, the need for a wrench, and extends the life of the belt because it is always in the correct adjustment.

Approved fuel

Theuse of biodiesel fuel up to 20% (B20) concentration is approved. Biodiesel fuel needs to meet ASTM PS 121 or DIN 51606 specifications.Alocal fuel supplier can providespecifications.

Hitch, lower link draft sensing

5M Series lower link draft sensing5M Series lower link draft sensing
5M with Frontier's rear blade5M with Frontier's rear blade

Draft sensing allows the hitch to quickly raise or lower, as needed, to control the load on the engine. It also reduces the need to downshift into a lower gear when operating in a rough spot to eliminate a more complicated operating experience.

The draft response is adjustable using the draft control lever to match the operating conditions and implement being used.

The lower link draft sense utilizes the draft links to instantaneously sensor the load information coming from the implement and delivers it to the hitch control mechanism for fast, smooth, and accurate hitch corrections.

The operator selects the rear hitch load setting by adjusting the draft-sense control knob. Depending on field conditions, it can be changed on the go.

5M Series lower link draft sensing5M Series lower link draft sensing
5M with Frontier's rear blade5M with Frontier's rear blade

Draft sensing allows the hitch to quickly raise or lower, as needed, to control the load on the engine. It also reduces the need to downshift into a lower gear when operating in a rough spot to eliminate a more complicated operating experience.

The draft response is adjustable using the draft control lever to match the operating conditions and implement being used.

The lower link draft sense utilizes the draft links to instantaneously sensor the load information coming from the implement and delivers it to the hitch control mechanism for fast, smooth, and accurate hitch corrections.

The operator selects the rear hitch load setting by adjusting the draft-sense control knob. Depending on field conditions, it can be changed on the go.

5M hydraulic capacities can meet the needs of demanding tasks