ZTrak™ Zero Turn Mower
Key engine features:
The large-capacity fuel tank is easy to fill, and a convenient fuel level gauge is provided:
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (237 mL[8 oz] ) for more information.
Each Z700 Series ZTrak™ Mower is equipped with either a 48-in. (122-cm), 54-in. (137-cm), or 60-in. (152-cm) HC PRO Mower Deck.
High-capacity (HC) mower deck | ZTrak model | |||||
Z720E | Z735E | Z730M | Z735M | Z740R | Z760R | |
48-in. (122-cm) High-capacity PRO | X | X | X* | |||
54-in. (137-cm) High-capacity PRO | X | X | X | X* | X* | |
60-in. (152-cm) High-capacity PRO | X | X | X | X | X* | X* |
*Optional Tweel® tires are not compatible with material collection system (MCS)
The mower deck has a deep-deck design:
Steel reinforcing bars are welded to the front edge and trim side of the mower deck:
The deck has deep, strong spindle pockets to keep the blades aligned, even after years of tough operation:
Flip-up spindle covers make cleaning the spindle area convenient.
Dual-captured front and side anti-scalp wheels:
A permanent step weldment is located at the left front corner of the mower deck:
The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material.
Advantages of mulching grass clippings include:
MulchControl is an innovative, simple design that is easy to use and maintain:
The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle:
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
MulchControl is a field-installed attachment and compatible with the 48-in. (122-cm), 54-in. (137-cm), and 60-in. (152-cm) HC PRO Mower Decks available for the Z700 Series ZTrak Mowers.
The 230-L (6.5-bu) rear bagger efficiently collects material from a 48-, 54-, or 60-in. (122-, 137-, or 152-cm) Mower Deck:
Note: Model year 2023 and newer (SN 060,001-) Z700 ZTrak Mowers use 42-lb. (19-kg) suitcase weights. Model year 2019-2022 (SN 010,001-060,000) use 18-lb (8.2-kg) weights.
The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:
NOTE: Appropriate hopper, Power Flow blower, and chute are required and ordered separately.
Capacity | 230-L (6.5-bu)bu (230 L) |
Material: |
|
Hopper top | High impact polypropylene |
Chute | Polyethylene |
Blower housing | Nylon |
Fan | Ultra-high molecular weight (UHMW) polyethylene |
Bags | Polyester |
Filling | Directly into bags for emptying on ground or in trailer or into plastic liners |
Fan diameter | 33 cm (13 in.) |
Fan width | 7 cm (2.75 in.) |
Number of fan blades | Four |
NOTE: MulchControl attachments and MCS components are not included in base equipment for a Z700 Series ZTrak machine and must be ordered separately.
Tweel is a trademark of Compagnie Générale des Etablissements Michelin SCA.
The operator station is designed to provide superior operator comfort for many different operators:
The patent-pending, adjustable three-position toe board allows any operator to quickly adjust the footrest position for greatest comfort:
A deep, padded seat combined with adjustable armrests, adjustable fore/aft position, and adjustable suspension springs optimises comfort for the operator:
Two steel springs under the seat absorb shocks when traveling over rough areas to provide a smoother ride:
The seat is securely held down for operator comfort and safety yet is easy to raise when necessary:
Adjustable steering levers are shaped for operator comfort and ease of controlling vehicle speed and direction.
The steering levers offer 18 different positions to accommodate operator preference for hand placement and leg clearance.
Model year 2023 and newer R-Series Z700 ZTrak Mowers include standard LED work lights. The lights are integrated into the front of the foot platform and side fenders to protect them from damage and the elements. BUC11547 LED work lights are available as a field installed attachment to upgrade for E- and M- Series models. BUC10301 LED work light kit is for earlier model years that do not have provisions for integrated LED lights.
Operator convenience is provided with easy-to-reach deluxe cup holder and storage areas.
A deep padded seat combined with adjustable armrests, adjustable fore/aft position, and adjustable suspension springs optimises comfort for the operator:
Armrests can be raised for easier entry and exit from the machine.
Infinite angle adjustment of the armrest can be made by an easy-to-use thumbscrew.
Two steel springs under the seat absorb shocks when traveling over rough areas to provide a smoother ride:
The seat is securely held down, but easy to raise when necessary:
An ergonomic design and professional grade components are suitable for a wide variety of operators and conditions:
Adjustable features customise the mowing experience for each operator. One of these features is an adjustable foot platform.
The patent-pending, adjustable, three-position toe board allows the operator to quickly adjust the footrest position for greatest comfort:
Short operators may be most comfortable with the platform in the rear position (as shown above), while tall operators may be more comfortable with the platform in the forward position. Or perhaps, the middle position provides just the right amount of leg room.
Patent-pending foot pegs (standard on R Series, optional on E and M Series) provide the operator with different foot placement options.
Exclusive, 4-year, single-source, bumper-to-bumper warranty is included for all John Deere Z700 Series ZTrak mowers. The warranty places John Deere at the forefront of the mowing industry. It is hassle free, with one company handling all the paperwork.
Z720E, Z735E | 4-year, 500-hour warranty |
Z730M, Z735M | 4-year, 750-hour warranty |
Z740R, Z760R | 4-year, 1000-hour warranty |
A convenient service decal gives basic maintenance information. It provides a quick reference for keeping recommended service up to date. It is located underneath the battery cover.
To speed access to owner information web pages, a QR code is printed onto a product identification number (PIN) label located under the right steering lever. The owner information web pages that include links to:
The professional-style steel foot platform is easy to remove without tools:
The engines are easy to service, including changing the oil and the oil filter and servicing the air filter:
Engine air filters are at the top of the engine for easy service:
Only three grease fittings require service:
Three to lubricate the mower-blade spindles, two easily accessed from the spindle covers, and the third by removing the foot platform.
The battery is protected from debris, dust, and moisture:
A patent-pending deck-leveling system provides easy adjustment at all four mower mounting points:
Serviceability is designed into the mower deck:
Tow-valve controls are provided for each transmission:
Four tie-down locations are provided for convenience and safety when trailering the machine.
An operation and safety DVD is provided with each machine. Please consult the operator’s manual for other safety and operating procedures.
*Term limited to years or hours used, whichever comes first, and varies by model. See the WARRANTY FOR NEW JOHN DEERE AGRICULTURAL EQUIPMENT AND WARRANTY FOR NEW TURF & UTILITY EQUIPMENT at JohnDeere.com.au/NewEquipmentWarranty or JohnDeere.co.nz/NewEquipmentWarranty
The operator control panel is conveniently located to the right of the operator. The following controls are found on the right-hand console:
Motion control levers are shaped and located for operator comfort and ease of control.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
On-board tracking adjustment can be made by the operator from the operator seat.
A patent-pending automatic parking brake system is designed into the steering control levers:
The internal parking brake rotor and puck are continually lubricated and cooled for dependable operation and long life.
Mower deck cutting height adjusts from 3.8 cm (1.5 in.) to 12.7 cm (5 in.) in 0.64 cm (0.25 in.) increments for excellent cut quality and performance:
Safety interlocks help prevent operating in an unsafe way:
A strong, welded steel frame provides solid, reliable support for the machine components and operator:
Large front caster wheels provide a smooth ride and level cut:
Rear tires have high-quality tread and optimum size for superior traction and smooth ride:
A heavy-duty, permanent step weldment is located at the left front corner of the mower deck:
Michelin, X, and Tweel are trademarks of Compagnie Générale des Etablissements Michelin SCA.
Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability:
The hydrostatic drive features two Hydro-Gear ZT-3100® transmissions for superior performance and durability:
Transmission fluid expansion tanks are provided for each transmission. Yellow filler cap is easy to find and identify.
Tow-valve controls are provided for each transmission:
Hydro-Gear and ZT-3100 are trademarks of Hydro-Gear Limited Partnership AF Holding Company, a Delaware Corporation and Danfoss Power Solutions (US) Company, a Delaware Corporation.
The spacious operator station has been designed for comfort, visibility, and ease of use:
The ROPS and seat belt work in conjunction to provide a protective zone around the operator:
Foldable ROPS and retractable seat belt are standard equipment:
ROPS position | Z720E and Z735E machine height | Z730M and Z735M machine height | Z740R and Z760R machine height |
Full height | 182.2 cm (71.7 in.) | 182.2 cm (71.7 in.) | 183.2 cm (72.1 in.) |
Down position | 120.3 cm (47.4 in.) | 126.2 cm (49.7 in.) | 129.5 cm (51 in.) |
A JDLink™ M Modem - 4G connects a commercial mower to the John Deere Operations Center, which enables you to manage your fleet more efficiently, increase productivity, and reduce labor costs. With a modem and Operations Center, you are always connected to the work in progress and can make timely adjustments to keep your fleet mowing.
A JDLink M Modem - 4G is standard equipment on model year 2024 and newer TerrainCut Front and Wide-Area Mowers.
A modem can be field installed on:
See compatibility section for serial number breaks and requirements.
The John Deere Operations Center tracks your fleet and provides tools to analyze mower data. The connected features vary by mower model.
Models | Location and status | GPS speed | Geofencing and curfews | Engine hours | Maintenance planner | Machine Analyzer Tool | Fuel level | Fuel consumption | Diagnostic trouble codes | Service Advisor Remote |
Z700 ZTrak Mowers | X | X | X | Key | X | --- | --- | --- | --- | --- |
Gasoline-powered Z900 ZTrak Mowers | X | X | X | Key | X | --- | --- | --- | --- | --- |
Z994R ZTrak Mowers | X | X | X | Key | X | --- | --- | --- | --- | --- |
E Series QuikTrak Mowers | X | X | X | Key | X | --- | --- | --- | --- | --- |
Q820M, Q850M, and Q850R QuikTrak Mowers | X | X | X | Sync | X | X | X | --- | X | --- |
Q865R EFI QuikTrak Mowers | X | X | X | Sync | X | X | X | X | X | X |
1550 TerrainCut Front Mowers | X | X | X | Key | X | --- | --- | --- | --- | --- |
1570, 1575, 1580, and 1585 TerrainCut Front Mowers | X | X | X | Sync | X | X | --- | --- | X | X |
1600 TerrainCut Wide-Area Mowers | X | X | X | Sync | X | X | --- | --- | X | X |
The JDLink M Modem - 4G regularly transmits the location and operational status of each mower in the fleet so you can monitor mowing progress on the Operations Center.
The modem regularly transmits the mower’s engine hours to inform maintenance planning and balance use.
Factory or custom maintenance plans can be established in Operations Center. Maintenance alerts are sent when engine hours reach maintenance intervals.
On select products, the modem reports the time the mower spent transporting, idling, and working. The Operations Center’s Machine Analyzer tool reports usage data which allows you to analyze operator behavior, identify causes of low productivity, and initiate corrective actions.
On select products, the modem reports the fuel level. On these products, an analysis of fuel consumption is available in the Operations Center Machine Analyzer Tool. Measuring fuel consumption enables you to address causes of excessive fuel use.
On select products, the modem transmits the trouble codes generated by the mower’s control units to the Operations Center. Addressing DTCs can reduce downtime and repair costs. For example, a low-engine oil pressure DTC can indicate an engine is low on oil. Addressing the issue can prevent costly downtime and repairs.
On select products, John Deere dealers can perform remote diagnostics, software programming, and adjustments without the cost of a service call.
A JDLink M Modem - 4G is standard equipment on model year 2024 and newer (SN 110,001-) TerrainCut Front Mowers and model year 2024 and newer (SN 690,001-) TerrainCut Wide-Area Mowers.
A JDLink M Modem - 4G can be field installed on the commercial mowing products listed below. Field installation attachments simplify modem installation, and include brackets, mounting hardware, harness, and instructions. Field installation requires a JDLink M Modem - 4G to be ordered separately.
Model | Compatible model years | Installation attachment |
Z700 ZTrak Mowers | 2024 and newer (SN 080,001-) | BUC11759* |
Gasoline-powered Z900 ZTrak Mowers | 2024 and newer (SN 130,001-) | BUC11759* |
Z994R ZTrak Mowers | 2024 and newer (SN 070,001-) | BUC11759* |
Z997R ZTrak Mowers | 2021 and newer (SN 800,001-) | To be determined |
QuikTrak Mowers | 2024 and newer (SN 010,001-) | BUC11744 |
R Series commercial walk-behind mowers | To be determined | To be determined |
TerrainCut Front Mowers | 2022-2023 (SN 080,001-110,000) | BUC11797 |
1600 TerrainCut Wide-Area Mowers | 2023 (SN 680,001-690,000) | BUC11797 |
*Expected Summer of 2024